This tutorial will teach you how to increase the speed of your computer by increasing the amount of virtual memory in Windows 10.
Paging File is a necessary and secret element in Windows 10 that is designed to temporarily transfer and remove unused pages in RAM. Through this method, Microsoft has made it possible for the Windows operating system to transfer more important commands and tasks more quickly to physical physical memory, which ultimately results in a higher load on the RAM and the amount of data in the processing queue is higher than the RAM level. , Significantly increase computer productivity.
In addition, virtual memory plays an important role when crashing a computer and displaying the blue screen of death, because if the amount of memory is not large enough, information about the memory location of the memory at the time of the computer crash will never be stored.
The Windows 10 operating system recognizes the need for intelligent virtual memory, but sometimes there is a need to manually increase virtual memory.
If you have also recognized this need on your computer, Windows 10 will allow you to manually increase virtual memory in two different ways.
Increase the amount of virtual memory through Settings
۱. Open Settings
۲. Click the System section
۳. Enter the About section
۴. Under the Related settings section, select System Info
۵. Select the Advanced system settings option from the left panel
۶. Click the Advance tab
۷. Below the Performance section, click the Setting button
۸. Click on the Advanced tab again
۹. Under the Virtual memory section, click the Change button
۱۰. After logging into this page, uncheck Automatically manage paging file size for all drives to stop automatic system memory allocation.
۱۱. Enable the Custom size option for manually allocating virtual memory
۱۲. Enter the amount of initial and final memory in megabytes
Note : Note that the amount of virtual memory for each device varies depending on the type of hardware; hence no default values can be defined for this section; however, it is usually suggested that the initial memory (Initial Size) is 1.5 times the initial amount and Allocate to the Maximum Size and three times the initial size.
۱۳. Click the Set button
۱۴. Click OK and repeat this again
۱۵. Finally, restart your device once
After restarting your computer, you will notice the effect of increasing virtual memory while navigating through menus and running applications. However, if for any reason you want to get your computer back to the previous settings, you can do the same steps once again, with the exception of the Automatically manage paging file size for all drives check box.
Increase the amount of virtual memory through CMD
۱. Open the Start menu
۲. Enter the word CMD in the search bar and click on the first similar result and select Run as administrator .
۳. To find out the current location of the virtual memory, copy the following command to the CMD environment, and then press the Enter key on the keyboard:
wmic pagefile list / format: list
۴. To change the amount of virtual memory manually enter the following command and then press Enter:
wmic computersystem where name = “% computername%” set AutomaticManagedPagefile = false
۵. Enter the following command to enter the initial and final memory and press the Enter key again on the keyboard.
wmic pagefileset where name = “C: \\ pagefile.sys” set InitialSize = YOUR-INIT-SIZE, MaximumSize = YOUR-MAX-SIZE
Now, for example, we set the 1 and 2 MB values for the initial memory and the final memory, respectively:
wmic pagefileset where name = “C: \\ pagefile.sys” set InitialSize = 9216, MaximumSize = 12288
You can also restart your computer by writing the following command:
shutdown -r -t 0
After you have entered the last command, your computer will restart, and after reloading the operating system you should probably see changes in the navigation speed between apps and menus.
If for any reason you decide to go back to the previous settings, you can automatically assign virtual memory allocation to the operating system via the following command in the CMD environment:
wmic computersystem where name = “% computername%” set AutomaticManagedPagefile = true
Note that the device will still need to restart at this point to make changes.